ONLINE MCQ EE AND ECE-CONTROL SYSTEMS 5

1. A Closed loop system is basically different from open loop control system due to:
a) Feedback
b) Servomechanism
c) Actuating signal
d) Error Signal

Answer  

2. Introduction of the feedback reduces the effects of:
a) Noise signal
b) Disturbances
c) Error signals
d) Error and noise signals
e) Noise signals and disturbances

Answer  

3. A control system in which control action depends on the output is called the __ control system
a) Open loop
b) Closed loop
c) Stable
d) Unstable

Answer  

4. In a control system the use of negative feedback:
a) Eliminates the chances of instability
b) Increases the reliability
c) Reduces the effects of disturbance and noise signals in the forward path
d) Increases the influence of variations of component parameters on the system performance

Answer  

5. A controller essentially is a:
a) Comparator
b) Sensor
c) Amplifier
d) Clipper

Answer  

6. In a control system, the controller output is given to:
a) Sensor
b) Comparator
c) Amplifier
d) Final Control element

Answer  

7. The deviation of the primary feedback signal from the reference input is called the:
a) Actuating signal
b) Error signal
c) Command
d) Manipulated variable

Answer  

8. The transient response of a system is mainly due to:
a) Friction
b) Inertia forces
c) Stored energy
d) Internal forces

Answer  

9. Regenerative feedback:
a) Implies feedback with positive sign
b) Is sometimes used to increase the loop gain of the feedback system
c) Has the transfer function with a negative sign in the denominator
d) All the above

Answer  

10. In a hybrid feedback control systems carrier signals are:
a) ac only
b) dc only
c) both ac and dc
d) none of the above

Answer

ONLINE MCQ EE AND ECE-CONTROL SYSTEMS 6
ONLINE MCQ EE AND ECE-CONTROL SYSTEMS 4

Leave a Reply