ONLINE Multiple Choice Questions EE-Synchronous Motors PART 3

31. The constant speed of a
synchronous motor can be changed to new fixed value by
(A) changing the applied voltage
(B) interchanging any two phases
(C) changing the load
(D) changing the frequency of supply.

Get Answer

32. A 3 phase, 400 V, 50 Hz
synchronous motor is operating at zero power factor lagging with respect to the
excitation voltage. The armature reaction mmf. produced by the armature current
will be
(A) magnetizing
(B)  demagnetizing
(C) cross-magnetizing
(D) none of the above.

Get Answer

33. In a synchronous motor, the
torque angle is
(A) the angle between the rotating stator flux and rotor poles
(B) the angle between magnetizing current and back emf
(C) the angle between
the supply voltage and the back emf
(D) none of the above.

Get Answer

34. A 3 phase, 400 V, 50
Hz, 4 pole synchronous motor has a load angle of 10° electrical. The
equivalent mechanical degrees will be
35.
(A) 10°
(B)5√2 degrees
(C) 5 degrees
(D)
1 degree.

Get Answer

35. A 3 phase, 400 V, 50 Hz synchronous motor
has fixed excitation. The load on the motor is doubled. The torque angle, φi will become nearly
(A) φr /2
(B) φr
(C)2 φr
(D) √ 2 φr

Get Answer

36. The hunting in a synchronous motor takes
place when
(A) friction
in bearings is more
(B) air gap
is less
(C) load
is variable
(D) load
is constant.

Get Answer

37. V curves for a synchronous motor represent
relation between
(A) field
current and speed
(B) field
current and power factor
(C) power
factor and speed
(D) armature
current and field current.

Get Answer

38. The breakdown. torque of a synchronous motor
varies as
(A)1
/(applied voltage )
(B) 1/(applied voltage )2
(C)
applied voltage
(D)
(applied voltage)2.

Get Answer

39. Hunting in a synchronous motor cannot be due
to
(A) variable
frequency
(B) variable
load
(C) variable
supply voltage
(D) windage
friction.

Get Answer

40. When the excitation of an unloaded salient
pole synchronous motor suddenly gets disconnected
(A) the
motor stops
(B) it
runs as a reluctance motor at the same speed
(C) it
runs at a reluctance motor at a lower speed.

Get Answer

41. Which synchronous motor will be smallest in
size ?
(A) 5
HP, 500 rpm
(B) 5
HP, 375 rpm
(C) 10
HP, 500 rpm
(D) 10
HP, 375 rpm.

Get Answer

42. A synchronous machine has its field winding
on the stator and armature winding on the rotor. Under steady running
conditions, the air-gap field
(A) rotates
at synchronous speed with respect to stator
(B) rotates
at synchronous speed with direction of rotation of the rotor
(C)
remains stationary with respect to stator
(D) remains
stationary with respect to rotor.

Get Answer

43. If the field of a synchronous motor is
under-excited, the power factor will be
(A) unity
(B)
lagging
(C) leading
(D) more than unity.

Get Answer

44. The name plate of an induction motor reads 3
phase. 400 V, 50 Hz. 0.8 of lagging, 1440 rpm. On similar lines the name plate
of a synchronous motor should read
(A) 3
phase, 400 V, 50 Hz, 0.8 pf lagging, 1500 rpm
(B) 3
phase, 400 V. 50 Hz, 0.8 pf leading, 1500 rpm
(C) 3
phase, 400 V, 50/60 Hz, 0.8 pf lagging, 1500 rpm
(D) 3
phase. 400 V, 50/60 Hz, 0.8 pf leading, 1500 rpm.

Get Answer

45. In which coil the emf generated will be
more, for given flux distribution and number of turns
(A) Full
pitch coil
(B) Short
pitch coil
(C) Long
pitch coil
(D) Equal
emf will be generated in all cases.

Get Answer

ONLINE Multiple Choice Questions EE-Synchronous Motors PART 4
ONLINE Multiple Choice Questions - Electric Machine Design PART 18

Leave a Reply