A. Power factor

B. Form factor

C. Load factor

D. Diversity factor

Answer

[2]

Suppose that two ac waves have the same frequency but differ in phase

by exactly 1/20 of a cycle. What is the phase difference between these

two waves?

Answer

[3] The unit of inductance is

A. Mho

B. Hendry

C. Ohm

D. Farad

Answer

[4] What is the angular frequency of the ac signal having a frequency of 1770Hz

Answer

[5] Thevenin’s equivalent circuit consists of

A. Series combination of Rth, Eth, Rl

B. Series combination of Rth, Eth

C. Parallel combination of Rth, Eth, Rl

D. Parallel combination of Rth, Eth

Answer

[6] The frequency of DC supply is

A. 16 2/3 Hz

B. 60 Hz

C. 50 Hz

D. 0 Hz

Answer

[7] Load factor is defined as the ratio of

A. Max demand/ Average demand

B. Average demand/ Connected load

C. Average demand/ Max. demand

D. Connected load/ Max demand

Answer

[8] Q factor of an inductive coil is given by

B. 2π fr/R

C. R/Z

D.

*l*r/

*l*

Answer

[9] The rms value of sinusoidal 100V peak to peak is

A. 100 V

B. 50/√2 V

C. 50 V

D. 100/√2 V

Answer

B. 220V, 100W

C. 115V, 60W

D. 115V, 100W

Answer

__Solution Hint:__

[2] One cycle = 360°.

1/20 of cycle is 360/20 = 18°

[4] Angular frequency ω = 2πf (rad/s)

[7] Some of the important terms in power system:

Demand factor = maximum demand / Connected load

Diversity factor = Sum of individual max. demands / Max. demand on power station

The ratio of average load to the maximum demand during a given period is known as load factor.

Load Factor = Average Load / maximum demand

[8] Quality factor is the ratio of reactive power to average power (Q/P)

Qs = [I2XL]/[I2R]

Qs = XL/R

Qs = ωL/R

Qs =2π fL/R

[9] Vrms = Vm/√2